Archive
What are the standards implemented by the National Institute of Justice?
Why body armor?
Why body armor?
Firearms have shown to be a threat to a lot of lives all around the world, including the United States. Body armor has come into play, safeguarding the life of a lot of people, for at least the last three decades. The Journal of Occupational and Environmental Hygiene conducted a study, where they compared officers that wore body armor daily to those who did not. Results showed how officers who do not wear body armor as a routine are 3.4 times more likely to be fatally injured from a torso shot than those officers who do wear protection. Law enforcement and correction officers have relied, and continue to do so, on the protection provided by bulletproof vests. But how do they choose the right protection? The answer is by following the NIJ standards.
What does NIJ stand for?
Not everyone’s armor is made to shield the same impact, reason why there are various levels of protection that need to be taken into consideration. Therefore, when choosing the right body armor, it is essential to ensure that it adheres to the protection level you need. The best way to get an accurate estimate is by following certain common standards. Even though there are several standards set by different departments, the most widely used guidelines are those set by the National Institute of Justice, recognized as one of the world leaders at standardizing body protection. The NIJ standard is the only one that is nationally accepted for the body armor worn by law enforcement, which proves why it is the most reliable and used measurement. When handling body armor, the NIJ has three specific tasks, the first one being the establishment and update of voluntary minimum performance guidelines for the body armor. Secondly, they are to conduct testing against those standards to make sure that the body armor in question meets those guidelines. The other major task the NIJ is responsible for is sponsoring research with the ultimate goal of improving body armor in general, since technology and new discoveries are constantly improving and growing.
What is the standard used now?
The NIJ Standard-0101.06, Ballistic Resistance of Body Armor was released on July of 2008 by the National Institute of Justice. The “.06” standard is responsible for setting the minimum performance requirements and examination methods for the ballistic resistance of personal body armor meant to shield impacts directed at the torso. Something to take into consideration is that the fact that this new standard has been imposed does not mean that the body armor models that comply with the .04 standards are invalidated. However, it is recommended to follow the new standard rather than the old one. Also, the NIJ Standard-0101.06 requires more rigorous testing of ballistic armor.
What does NIJ level I protection include?
The first level of the National Institute of Justice is NIJ Level I, which is the most basic level of protection. This armor protects against .22 caliber Long Rifle Lead Round Nose (LR LRN) bullets with nominal masses of 2.6 g (40 gr) impacting at a velocity of at least 320 m/s (1050 ft./s). It also protects against 380 ACP Full Metal Jacketed Round Nose (FMJ RN) bullets with nominal masses of 6.2 g (95 gr) with a velocity impact of 312 m/s (1025 ft./s) or less. In more general terms, this level of body armor protection shields against the impact of small handguns only.
What does NIJ level IIA protection include?
The second level of protection, NIJ Level IIA is a little more complete than the first one in the sense that it not only protects against small handguns but also against low velocity handguns as well. This type of body armor protects against 9mm Full Metal Jacketed Round Nose (FMJ RN) bullets with nominal masses of 8.0 g (124 gr) at a minimum velocity of 332 m/s (1090 ft./s) and .40 S&W caliber Full Metal Jacketed (FMJ) bullets with nominal masses of 11.7 g (180 gr) at a minimum velocity of 312 m/s (1025 ft./s) or less. Additionally, it protects against Level I threats as well. NIJ Level II protection is usually required by police departments and full-time guards.
What does NIJ level II protection include?
The third level is referred to as NIJ Level II because it is basically the same thing as NIJ Level IIA, but with a little more of protection. Instead of just shielding impacts from small handguns and low velocity handguns, it also protects against high velocity handguns. In more specific terms, it shields impacts of .357 Magnum jacketed soft-point bullets with nominal masses of 10.2 g (158 gr.) going at a velocity of 425 m/s (1,395 ft./s) or less and against 9mm full-jacketed bullets with nominal velocities of 358 m/s (1,175 ft./s). It is also great protection against most of the other factory loads in caliber .357 Magnum and 9mm and is assumed that it also protects against the Level I and IIA threats. This type of body armor tends to be heavier and with more bulk than the levels before it. It is usually worn by full time officers.
What does NIJ level IIIA protection include?
The National Institute of Justice provides levels that range from NIJ Level I all the way to NIJ Level III. In between those there is NIJ Level IIIA, which is one of the most commonly sought levels of body armor protection. A person that is looking for a complete protection that can be worn daily usually refers to this level. This armor protects against impacts from a .44 Magnum, semi jacketed hollow point (SJHP) bullets with nominal masses of 15.55 g (240 gr.) impacting at a velocity of 426 m/s (1,400 ft./s) or less, and against 9mm full-metal jacketed bullets with nominal masses of 8.0 g (124 gr.) impacting at a velocity of 426 m/s (1,400 ft./s) or less. NIJ Level IIIA also protects bullets from small handguns, low velocity handguns, high velocity handguns, high powered handguns and sub machine guns.
What does NIJ level III protection include?
After NIJ Level IIIA, the next level of protection is called NIJ Level III. This level protects against impacts from 7.62mm full-metal jacketed bullets (US military designation M80) with nominal masses of 9.7 g (150 gr.) impacting at a velocity of 838 m/s (2,750 ft./s) or less. Also, it provides protection against threats such as 223 Remington (5.56mm FMJ), 30 Carbine FMJ, and 12-gauge rifled slug, as well as Level I through IIIA threats. NIJ Level III is considered one of the best levels, since it protects from a larger range of guns. Specifically, it can receive bullets from small handguns, low velocity handguns, high velocity handguns, high powered handguns, sub machine guns, machine guns, high powered rifles as well as assault rifles.
The Best Body Armor
The Best Body Armor is a company that specializes on providing the highest quality of body armor at the lowest prices. It not only offers body armor that has surpassed the Department of Justice guidelines but that also exceeds National Institute of Justice standards for NIJ IIIA and NIJ III. All the products are assembled and manufactured here in the United States, and come with a 10-year warranty included. Every unit is to be custom made to spec, hand inspected individually, and sold direct from a United States government sanctioned body armor manufacturer. We offer one size vest, since they can be easily adjusted to any body type. All the body armor is tested by independent, government sanctioned weapons labs, and each vest is individually made and inspected for each customer to provide a vest that offers maximum protection against any attack. All the plates are made with a specialized shooter cut to provide the maximum coverage possible while also having enough space for good mobility.
If interested in any of the products the company has to provide, use promo code “ stopshot “ to get a $50 discount off your purchase.

Is it time for EMS and other First Responders to wear bullet proof vest?
Kevlar vests, also known as bulletproof or ballistic vest are worn by Military Soldiers throughout the world to protect themselves from harm and it is not only Soldiers wearing these types of vests anymore now Police Officers worldwide are wearing the Kevlar vest due to the rising number of firearm related death and a rise in homeland terrorism. However, the real questions arise when you look to the other first responders who put themselves in harm’s way such as the EMS. EMS and Firefighters are called to the scene of almost every incident no matter how dangerous and can be put in harm’s way themselves without any protective gear. So, is it not time for the EMS and other first responders to start wearing Kevlar and bulletproofing vest to keep the lives safe as well. EMS and Firefighters are more likely to come into conduct with stabbings from knives and needles then they are to be shot at. But this does not take away the need for the vests or the danger they will face. Kevlar vest today can easily stop a stabbing attack from either a needle or a knife to a specific area. So, it is time to re-evaluate the need for EMS, paramedics, and Firefighters to see if part of their essential life save gear should be a Kevlar or other type of bullet proof vest that they wear in order to save their life so that they may save the lives of other!
There is no guarantee that the attacker will aim for where the vests are protecting. However, the case, when it comes down to it would not you rather have a smaller chance for that attacker to be able to hit your vital organs and mid-section. Along with the knife attacks comes still the threat of the EMS or Firefighters being shot at while attempting to do their job, which just so happened in Selma, Al. in 2016 when 2 EMS were attending to a local call (though it seemed strange when it came through) and were checking a patient’s blood pressure when multiple shots rang out heading towards the EMS workers though luckily neither of the 2 were injured. (Dunigan) Seeing this should put the image in your mind that no one of our First responders are safe and now need body armor and companies like The Best Body Armor are here to provide such needed items. Selling the greatest and latest in the technologies of bulletproof vest exceeding government standard, with NIJ levels up to NIJ 5 you can easily get what you need to keep you and your loved ones safe and out of harm’s way. With products ranging in all different sorts of colors and designs you are sure to find what you are looking for, also looking for trauma pads?! They have them, so whatever you need is and want desires The Best Body Armor has got what is need to ensure that your loved you or our EMS and Firefighters are dully protected.
The above attack is only one example of an attack on a crew of First Responders with attacks on the rise the departments are scrambling to come up with ways to figure out how to keep the paramedics and Firefighters safe and out of unnecessary harm’s way. Some departments have thought about having police escort firefighters to and from the scene, though this would take a lot of valuable time away from the lifesaving ability of the Firefighters. So instead of this what needs to be done is the purchasing of Kevlar vest and other types of ballistic vest so that Firefighters don’t have to worry about being escorted and can quickly respond to the emergency at hand. Likewise, EMS also face the similar problem and it too can be answered in the same fashion, with the purchasing of Kevlar vest so that it takes away the risk harm for the EMS worker and they can carry out their job quickly and efficiently as possible. There are concerns over buttressing our EMS and paramedics as it will seem to be militarizing our paramedics when can be off-putting to some people as we are not a militarized state. However, in a time when people are willing to attack first responders whom are just attempting to save the lives of innocent people it may be time to get over the fear of buttressing the EMS and Firefighters and give them the equipment needed to keep them alive and safe so that they can return home every night. This does not turn us into a militarized stated you see, just a well prepared and well-functioning first aid responding unit. As well as this problem, the vest may be restrictive to the EMS and paramedics as to where they will not they will not be able to do their job efficiently and quickly. What is meant by this is the fact that EMS personal need to be very agile and light on their feet in order to respond to the needs of the patients they are seeking to save. Will the body armor restrict their movements too much and keep them from doing their jobs effectively and efficiently? Will body armor make Firefighter and EMS targets for attacks if they are wearing them? Some people believe so, especially if they are wearing the differentiated colors to distinguish between police and EMS/Firefighters. So, people believe that why wear the different colors, but then the EMS/Firefighters will look just like the cops and as mentioned above the First Responders will soon look like a militarized police force which people will fear and hesitate to utilize.
On Oct. 26, 2015, shots rang out striking the main firehouse in Grand Rapids, proving that these first responders are getting closer and closer to the danger zone a daily basis even when they are still at their “Home Away from Home.” And if they are not truly safe there then they are definitely not going to be safe out in a field environment going up again who knows what exactly. Then another day Firefighters were attacked by a man wielding a box cutter and unfortunately two of the men were injured. Now if they had been wearing vests then very possibly they could have escaped without any type of incident. This is where the companies like The Best Body Armor come back into play with the manufacturing of Kevlar and bulletproof vest that will decrease the chance of anything happening to a loved one wearing them. With products exceeding government standards and NIJ levels all the way up to level NIJ 5, The Best Body Armor produces a various design of vest from ACU Camo, Black, Multi Camo, to Tan Camo so the customer can always get what they need and want in order to keep themselves and others protected. If EMS, Firefighters and other paramedics start to purchase Kevlar and other types of bulletproof vests the questions arises how will they sustain their equipment and supply budget for such things. Because, we all know once a vest is struck it is no longer good, so it has to be switched out, or that a vest can and will expire after a certain amount of years. So, the question arises how will they corral this problem? One way would be to have the personal purchase the device themselves or get grants from the government to purchase these lives saving devices. However, this does not stop the vest from becoming expired if not (hopefully) ever being used. Having this problem would likely cause the EMS and other departments to defer from purchasing the bullet proof vest.
In conclusion, with everything that is going on in this world, even the EMS, Paramedics, and Firefighters are no longer entirely safe from people seeking to do them harm while they are just attempting to save the lives of people in need. So, the question has arisen is it time for these heroes themselves to wear bulletproof vest and Kevlar vest so that they can become as safe as possible while on the job. However, people are concerned of the militarization of the EMS and Firefighters and how the public would react to that since we are not a non-militarized state, how would these departments afford such life saving devices and the price of the upkeep of the vest. Also, EMS are concerned with the maneuverability restrictions that would be put upon them if they were to wear a vest, but does that out way the cost of wearing the vest? So, what can change and happen? The Best Body Armor can happen, with top of the line bullet proof vest exceeding government standards and requirements EMS, Paramedics and Firefighters can get the best type of gear for what they need to keep their lives and comrades safe. With all different NIJ levels up to NIJ LEVEL 5 they are sure to find what they need to get the safety that is required to keep them alive.

Medical and Fire Departments Started Using Protective Vests and We should all use them too
Active shooters at schools, government buildings, churches and other public spaces is somethings that in my opinion will never stop. Unless we ban all weapons in the United States shootings around the country will continue and that won’t happen either for a long time. We all must accept that guns are something that people like, have and use. For this same reason, the Emergency service departments in Tampa Florida have accepted that shooting will continue and decided to issue a protective armor vest to every medical and fire department first responders. The City of Tampa spend more than $700,000 on 484 protective vests.
“If we expect to save lives, we must move in as close as possible,” said Craig Hare, Pinellas County Director of EMS & Fire Administration. “We need to come in right behind police officers the second they give us the go-ahead.”
I completely agree with Craig’s statement, Police officers and the Swat team are not the only first responders in a shooting scene. The medical and fire departments are also first responders with different jobs but they are all crucial to helping the victims come out safely. For this same reason is why the City of Tampa has decided to issue these vests, if the medics and firefighters are not protected against these shooters then at the end of the day we are just going to have more casualties and injuries during an active shooting. In the case of the medical and fire department, personal are required to listen to the police department. However, let’s say there’s a victim that’s injured in what is considered the “Hot Zone”, the area that is considered active for the shooter. These, ‘tactical medics” are trained to enter these areas and assist them. How can they do this without protective gear?
““That’s basically all we’re doing: taking care of immediate threats to life,” said Ross Pinney, one of Oldsmar Fire Rescue’s tactical medics who taught part of the training class where they practiced carrying and dragging victims from the scene of a shooting. “
I find this incredibly important, how is that just now these departments are beginning to issue armored gear to their employees? The government and City officials would do anything to save money and not spend, if every city in the nation were to spend $700,000 on armored vests I guarantee that the statistics for injuries and casualties would fall dramatically. City officials across the United States are sometimes found taking city funds for themselves, instead of using them for good purposes like protecting the people that risk their lives to save others.
“I get that there’s only so much money in the budget, but this is an important purchase because if and when this sort of thing does happen . . . the question will be, ‘Well, how come you weren’t better prepared?’”
Other cities across the United States should learn from the Tampa city officials and accept that active shooters will continue across the United States and there’s not enough city personal to protect every public building so instead they should invest the funds in protecting the first responders. This protective gear is not only required to be worn during an active shooter situation but also in any situation that can harm these first responders. As the Clearwater Fire & rescue Department stated
“that first responders must put on their body armor “before entering any type of hostile environment,” and this would include active-shooter situations, civil disturbances and fights.”
Although active shooters do the most damage and result in the largest number of casualties, it is also smart to make them wear the protective gear in these other dangerous environments because you never know who has a gun and decides to use it. A lot of these medical staff and firefighters don’t like the idea of wearing this protective gear in not serious situations. The Service departments in the City of Tampa decided to let each person decide if they want to wear the vests in none dangerous situations.
“Sean Becker, who is president of the Fire Fighters Association in Clearwater said, “We attended fire school with the full knowledge that we would be putting out fires, but we had no idea we would be asked to wear protective vests and helmets when responding to calls.”
The questions are, if every City service department is beginning to use protective vests then should we all? How can we know when we are going to need a vest? Has the world come to a point where we should all wear protective vests to work, to school and in our daily lives? Some argue yes, others argue that, that sounds ridiculous. Whichever you believe, I still think we should all own a body armor vest in order to decide ourselves when we should wear it or if anything were to happen, you can at least say in heaven “I did everything I could to protect myself, I was just in the wrong place at the wrong time “. On the other hand, if an armored vest or an armored backpack were to save your life you will be glad you were wearing at a bank shooting, airport or school shooting. The last question is, how much is your life worth to you?
Thank you for reading, if your life is worth more than $300 then don’t forget to check out our website and order your armored vest or armored backpack.

How effective is a bulletproof vest at stopping gunshots?
How did it all start?
For several years, people did not have proper ways of protecting themselves from bullets. There were only a few options available, and they provided limited, minimal protection but none against the shock of a bullet. After years of researching, a lot of materials were discovered to be effective in the making of bulletproof vests. It was then when Kevlar was invented by DuPont chemist Stephanie Kwolek, who was in the search for a way to make radial car tires lighter. This material is and was capable of cushioning, trapping, and preventing a bullet from reaching and penetrating through to the body. However, the standard bulletproof jacket now consists of both Kevlar and the insertion of plates, and it weights around 4.5 kg. There a several types of plates, made out of different of materials according to the preferences and circumstances of the user. These plates are essential in the process of receiving a bullet, since they prevent the user from being hurt or incapacitated.
How do you I know a vest is “bulletproof”?
In order to define a vest as truly bulletproof, then it needs to be bullet resistant. Being bullet resistant means that the vest can be penetrated by certain types and sizes of bullets traveling up to certain speeds, and it can then stop them from reaching through to the body. When purchasing a bulletproof vest it is important to take everything into consideration in order to choose the adequate bulletproof vest. There a different kinds of vest that are intended to be used in different circumstances. There are vests that are designed to absorb the bullets from small arms fire, and there are those that can protect against larger arms.
How do I correctly wear my bulletproof vest?
Even when bullet resistant, bulletproof vests can still cause injury to the user when shocked by a bullet, especially the ones made out of only Kevlar. For example, when stopping the bullet, it may still force the vest fabric onto the body, causing bruising, other internal injuries. This is why it is essential to not only buy those that include the plates, but also do so in a trust-able, safe company. In addition, in order to minimize the chances of being hurt, it is important to know how to properly use a bulletproof vest. A bullet proof vest should not be placed below the bellybutton. Having the bulletproof vest hang low into the waist can limit the mobility that the user has, and can make simple movements uncomfortable.
Best Bullet provides the best protection at the lowest prices. The vests offered are made out of durable, high tensile fabric with integrated MOLLE webbing and plates that are engineered to exceed all required government standards for military and law enforcement, making us a trust-able company. Hurry now and visit our website to see our variety of vests and find the perfect one for you!
All you need to know about bulletproof cars
When people think about armored cars they generally imagine a square, safe-like, and metal plated vehicle used by banks or jewelry stores in order to transport money. But the term “armored car” can be appropriated to other civilian and military vehicles that undergo certain mechanical changes in order to be fitted with materials that make it resistant to firepower; the materials vary between steel platings along the skeleton of the vehicle, kevlar paddings in the doors, and newer composite fiber materials used throughout for increased stopping power.
Cars classified as armored vehicles are implemented by many different professions ranging from politicians, judges, celebrities, bankers and any other person that could be under heavy protection like the pope. This line of vehicles, although designed mainly for police, riot control, special units and military use, has found a place in the civilian market and adapted to the demand.
So how much firepower is too much?
The epitome of firepower resistance is commonly known as The Beast; It’s POTUS’s presidential limo and it is equipped which much more than an interior office. Little information is out there on the exact specifications and limits of this vehicle but nothing from explosives, to chemical attacks, or even armor piercing rounds can stop this monster. On the more “acquirable” side of the spectrum you can find vehicles like the Toyota Land Cruiser or the Mercedes G-Class modified by Alpha armour, which can both withstand .357 assault rifle shots at point blank range, the Maybach and Chevrolet Camaro from Texas Armoring Corp., each offering protection from .308 rounds and James Bond-like built-in smoke screen. Some companies offer to add protection to the clients previously owned cars, but other ones like Inkas Armored have built a machine called The Huron; this super-resistant machine boasts an 8.3L Ten-speed transmission, off road capabilities, the interior is bunker-like and, although uncomfortable, it protects from any sort of explosions or bullet penetration.
What is the building process for armored cars?
Generally, the car armoring process begins by selecting an appropriate vehicle. These tend to range from limousines, to trunks, SUV’s and luxury cars. According to the protection level required by the client, a car and suitable degree of armament is decided upon. The second part involves stripping the vehicle bare, all interior accommodations and specs are removed in order to create an impenetrable cabin fitted with modified windows, doors, roofs, fuel tanks, floor and tires. All pillars and vulnerable parts of the vehicle are reinforced with many different bullet resistant materials; followed by the installment of ballistic glass, a polycarbonate laminated material that impossible to differentiate from a regular windshield. Adding all these specs can make the car weigh as much as 2,200 pounds more than factory bought, but a becomes an impenetrable, virtually undetectable and indestructible rolling fortress; all specs you want if you are in need of an armored vehicle in the first place.
Promocode: BODYARMOR

When Should You Wear A Bulletproof Vest?
Wearing a bulletproof vest in today’s society has become a necessity. In these past few months, we have experienced a plethora of unfortunate tragedies that have left us fearful of the future. Just a few months ago in Orlando, Florida, 49 people were killed when a man with an assault rifle fired inside of Pulse Night Club. This tragic event left the world in shock. Individuals no longer found a desire to go out and have a good time due to the fact that it could be life threating. Incidents like these are instances in which if a bulletproof vest was worn, some fatalities could have been prevented.
Uber Drivers
Being an Uber Driver is a case in which a Bulletproof Vest could be very beneficial. Driving strangers can be nervous and dangerous for the driver. Majority of the time, drivers have no issues and are safe transporting individuals to and from their destinations. While they are usually safe, there have been multiple reports on which drivers have been attacked. Bulletproof Vest are both stab and bullet resistant and could protect the driver when loading and removing luggage for individuals and when transporting them as well. Just as the vest can be beneficial for the driver, it could also be useful for the riders as well. Riders are sometimes catching Uber rides late at night and sometimes they are not natives to the city that they are in. Drivers could easily take a rider to a strange location and cause bodily harm. By wearing a vest, it could help in making sure the rider and the driver are safe.
Recent Events
On Wednesday March 22nd, there was a terrorist incident at the Houses of Parliament. Khalid Masood, 52, drove a car over Westminster Bridge mounting the pavement and hitting 20 pedestrians. According to theguardian.com, Masood jumps out of the car carrying two knives and rushes through the gates into New Palace Yard, where he attacks two yellow-jacketed male police officers at the security gates. PC Keith Palmer, 48, who was unarmed, is repeatedly stabbed and falls to the ground. Masood tries to run but is shot several times by plainclothes officers. Police confirm that four people have died, including the police and the attacker. Isis claims responsibility for the attack, praising Masood as a “solider of Islamic State”. This tragic event demonstrates the importance of wearing a bulletproof vest especially when traveling. Of the people injured included was an American tourist. While this was an accident in UK, we must realize that this could even happen to us here in the US. Wearing a bulletproof vest could have prevented injures by those who were stabbed. #PrayforLondon
Protection
The Best Bulletproof Vest just released new plates that exists nowhere else. They are a new special proprietary blend NIJ Level IIIA. These plates are half the weight of our steel plates and weigh about 4 pounds. These plates basically “eat” the bullets and cause a small impact on the body when shot. They can be shot at multiple times and still protect the body from injuries.
For more information, please visit our website at bestbulletproof.com. For $25 off, use the promo code: PISTOL
Body Armor during the Modern and Industrial Era
The Modern and Industrial Era were where body armor first was developed. Created out of the necessity to protect people, mainly kings in the beginning, from new projectile based weapons. Starting in Europe, the earliest accounts dates back to 1538 in Italy where a “gun-fire” resistant vest was made for the Holy Roman Emperor during the two year war that raged between the Romans, King Francis I of France and King Charles V of Spain . Around the same time in England Sir Henry Lee developed a plated armor, as Queen Elizabeths I’s champion, that allegedly could stop gun fire; yet it’s actual testing wasn’t fully documented. Nearly a hundred years later, during England’s Civil War in 1645, special equipment was fitted to one of the English Parliaments cavalry which consisted of a three metal plate layered cuirass armor that protected the torso and back. It relied on the outer plate as a shock absorber and the inner plates protected any fragment from penetrating the vest.
Two hundred years after the first attempts at bulletproof vests and society faces new problems. No longer are most people being slaughtered by war between kings but now some european countries face violence internally in the form of crimes and assassinations. In Dublin, the problem got so overwhelming it drove the country to have the first manufactures and sellers of bulletproof vests in history. Now, body armor would be available to anyone for the first time in an effort to reduce violence and disgraceful murders. Other forms of ballistic armor came during the 1860’s, when a defensive Korea ordered the development of a cotton based bulletproof vest after being threatened by a potential invasion from the United States. After invading a fort, based on an uncalled-for attack on U.S. ships seeking diplomacy, American troops retrieved various specimens of the vests and took them back for further research. The development of bulletproof armor wasn’t limited to only governments, the famous Australian outlaw Ned Kelly and his gang developed a plated armor made out of plough blades used in farming equipment. In their efforts to fight the government, Kelly’s gang would be fully protected with home made chest plates, helmets, shin and arm guards. These makeshift platings could be struck multiple times and deflected any firepower they were threatened with but, the exposure of the legs and hands made this armor eventually useless. Other outlaws, like the american Jim Miller, were known for wearing plated vests under-neath their coats which proved to be highly efficient in deflecting pistol and shotgun rounds.
Ultimately, bulletproof vests have been around for many years and their development has seen a steady rise in technological advancements. Body armor, even in its most primitive of forms, has proven itself time and again as a game changer when it comes to safeguarding and protecting people from gunfire; nowadays thankfully companies like Rhino Body Armor can offer vests that can protect you against anything ranging from large caliber handguns to high powered rifles.
If you’re looking for a vest visit gorillaarmor.com and use promocode: BODYARMOR